|
Additional Support Computer Systems Game Consoles |
Please note that we do not supply these routers ourselves, so we're unable to offer any technical support other than that given below.
The default IP address of these routers is generally 10.0.0.2, but you should check the manual supplied with the router to confirm this. If all is well you should be able to connect to the router in your web browser.
When logging into the router configuration you will be asked for a username and password. The default values for these are;
Username: admin
Password: epicrouter
Under the Configuration header on the left, click on the WAN option. Then, enter the following information:-
| Per VC Settings | Enabled = Yes VPI = 0 VCI = 38 Static IP Address = 0.0.0.0 Subnet Mask = 0.0.0.0 Gateway = 0.0.0.0 |
| Mac Spoofing | Mac Spoofing = Disable Mac Address = 00:00:00:00:00:00 |
| ATM | Service Category = UBR Bandwidth = 0 kbps |
| Encapsulation | PPPoA VC-Mux |
| Bridge | Disabled |
| IGMP | Disabled |
| PPP | Service Name = Orpheus Username = [your Orpheus username] eg. 12345-orpheus@ukadsl Password = [your Orpheus password] Disconnect Timeout = 0 MRU = 1492 MTU = 1492 MSS = 1432 Authentication = Auto Automatic Reconnect ticked |
| DHCP | DHCP client enable should not be ticked and the host name should be left blank. |
| Virtual Circuit | 0 |
Click on the Submit button at the bottom of the page and then select Save Settings on the left hand Configuration heading. Confirm by clicking on the Submit button.
The router will now restart and you should wait approximately one minute before reloading your web browser and attempting to visit a website (eg. http://www.bbc.co.uk)
|
  |